We face many hazards today anytime we operate a motor vehicle, personal or company. Weather, poor road conditions, and wildlife are some common hazards on the road today. Other drivers on the road also create many hazards. One very deadly activity taking place far too often is drowsy driving.
Read MoreStriking fixed objects with moving equipment or vehicles is common in manufacturing settings, on construction sites, and for occupations such as delivery drivers.
Read Morethat could When addressing hazards in the workplace most of the focus is put towards the physical hazards harm us. For example, hazards such as slips and trips, electrocution, heavy equipment, struck-by incidents, etc. are the topics focused on when looking for things that can seriously injure or hurt us. While there should be an emphasis on the many physical hazards in our workplaces, human performance factors that affect our work need to also be addressed.
Read MoreIt is an unfortunate reality that at some point you will be responsible for assisting during an injury or emergency situation in some capacity while on the job. When injuries occur at work it is important to know and understand some basic guidelines about getting help for an injured coworker.
Read Morehuge impact on our ability to work safely as well as efficiently. All too often, our work areas are set up and not changed for long periods of time, even The way we set up our work areas makes a when a rearrangement would be a great improvement.
Read MoreWeather can create many hazards and slow down production for construction sites and other work sites that are outdoors. This is especially true when rain creates excessively muddy conditions.
Read MoreLadders are an essential tool on many job sites and at home across the United States. Because of their widespread use and the inherent danger of working at heights, they are responsible for a significant number of injuries both on and off the job. Understanding the hazards of using a ladder, following the necessary safe work practices, and avoiding complacency can be a lifesaver.
Read MoreThere is an endless amount of acronyms when talking about safety. The acronym S.O.R.T. is a tool that can help remind us to take steps to address hazards and create a safe work environment. S.O.R.T stands for Stop, Observe, Recognize, and Take Ownership.
Read MoreChemicals exist on virtually every single worksite. Many chemicals used on the job are hazardous to humans depending on how an individual comes into contact with them as well as the amount of the chemical they are exposed to.
Read MoreAmputations are a very serious health and safety concern in the workplace. OSHA reports there is an average of seven amputations that occur in US workplaces every single day.
Read MoreWork area inspections are an important basic safe work practice that should be done before beginning a task. In general working at LMK Pipe Renewal, there are many work areas that remain the same day in and day out. On the other hand, there are areas that we work in that are constantly changing.
Read MoreThe decision to take a shortcut can be influenced by many different factors. At the end of the day shortcuts are a choice made by an individual…..
Read MoreThe human memory can be an amazing thing, but it is also very flawed. While there are people that can remember small details about an event decades later, others cannot remember where they set their wallet down….
Read MoreIt is important to avoid bees and wasps as well as being able to recognize when someone is suffering from a severe allergic reaction from an insect sting….
Read MoreInjuries are not reported because of many different reasons, but it is important to understand why all of them need to be….
Read MoreWe live in fast times- both at home and at work. With everything going on around us between stressors and the distractions of our environments, it is easy to glance over the small details…..
Read MoreSafety cannot be achieved through the effort of one or two people even if it is the CEO who putting forth the most effort in working towards having safe workplaces….
Read MoreWork area inspections are an important basic safe work practice that should be done before beginning a task. In general industry there are many work areas that remain the same day in and day out. On the other hand, there are areas that we work in that are constantly changing…..
Read MoreEach of us have own way of perceiving and viewing the life we have. Our experiences have shaped our perspective which affects the way we view events, and how we interact with the world around us…..
Read MoreThe acronym S.O.R.T. is a tool that can help remind us to take steps to address hazards and create a safe work environment. S.O.R.T stands for Stop, Observe, Recognize, and Take Ownership…..
Read More
