COLLECTION SAFETY SYSTEM PART 1 (SAFETY MEASURES)

The construction of sewers should be in accordance with standard design, with special attention

to self-cleaning velocities, good alignment, proper spacing of manholes, and adequate provision

for ventilation. These design standards when followed, will provide for a safer work

environment. However, there are several other points of safety that are of major importance.

Read More
LMK Pipe Renewal
Metal Welding and Cutting

Metal welding and cutting are duties that are performed daily by LMK Pipe Renewal workers.

The following sections are safety procedures, health hazards related to specific metals, and

protective equipment that each employee is to be aware of when welding and cutting metals.

Read More
LMK Pipe Renewal
Lock Out - Tag Out

If you are required to repair or maintain any machinery or equipment, or any electrical power source, start the job by locking out and tagging out all energy sources and starting mechanisms. Locking or tagging out is the only sure way to prevent other employees from accidentally activating the system.

Read More
"GOOD ENOUGH" MINDSET

For most of us, we have been doing our jobs long enough to know what the right way is to do something and what falls short to “good enough”. When it comes to workplace safety “good enough” does not cut it….

Read More
LMK Pipe Renewal
DROPPED OBJECTS

Dropped objects are a serious hazard at many worksites. In 2017, there were 237 workplace fatalities due to falling objects (the most recent statistics available) in the United States according to the Bureau of Labor Statistics. Furthermore, OSHA estimates that over 50,000 “struck-by a falling object” incidents occur each year on construction sites alone.

Read More
LMK Pipe Renewal
Ladder Safety

Ladders are an essential tool on many job sites and at home across the United States. Because of their widespread use and the inherent danger of working at heights, they are responsible for a significant number of injuries both on and off the job. Understanding the hazards of using a ladder, following the necessary safe work practices, and avoiding complacency can be a lifesaver.

Read More
LMK Pipe Renewal
FOUR FOCUS AREAS FOR WORK INSPECTION

Work area inspections are an important basic safe work practice that should be done before beginning a task. In general industry there are many work areas that remain the same day in and day out. On the other hand, there are areas that we work in that are constantly changing…..

Read More
LMK Pipe Renewal
HELPING OUT

When we see someone struggling with a task the first thing we naturally want to do is jump in and help.

Most times, this is perfectly fine and there is no issue that comes of jumping in to help. There are times however, when it is better to let someone else intervene or to not intervene at all…

Read More
LMK Pipe Renewal
SAFETY GLASSES

Vison loss and severe eye injuries occur all too often in today’s workplaces. According to the Centers for Disease Control and Prevention (CDC), each day, about 2,000 U.S workers sustain a job-related eye injury that requires medical treatment. Due to the severity and frequency of these injuries, there is no room for shortcuts or excuses when it comes to protecting your eyes on the job.

Read More
LMK Pipe Renewal
LINE OF FIRE HAZARDS

The term “line of fire” is very common when talking about the hazards of a work task. Depending on the work being completed, there may be many different lines of fire or there could be very few. It is important to understand what the “line of fire” is and how to avoid being in it to avoid injuries.

Read More
LMK Pipe Renewal
THE NEGATIVE SIDE OF QUICK REACTIONS

There are many times when quick reactions put people in the line of fire where they can be hurt. A person sees a situation occurring and in an instant, their mind tells their body how to react. At work, an impulsive decision to jump in and try to help in a situation going wrong may be the last decision a person makes. It is important to consider what our first reaction may be to certain situations and attempt to fight the urge to react impulsively without thought.

Read More
LMK Pipe Renewal
HEAT STROKE

Heat stress creates many hazards in the workplace for those employees who have to work in a hot environment. Hot environments can create indirect safety hazards, causing employees to lose focus on their work task or become fatigued. Heat stress also causes more direct illnesses such as heat cramps, heat exhaustion, and heatstroke. According to a report published by the CDC, during 2004–to 2018, an average of 702 heat-related deaths (415 with heat as the underlying cause and 287 as a contributing cause) occurred in the United States annually.

Read More
LMK Pipe Renewal
GASOLINE SAFETY

Gasoline is common both on the job and at home for use in both vehicles and equipment we use every day. It is important to practice safe handling and storage of gasoline to avoid spills and fires. Improper use and storage of gasoline leads to many injuries as well as property damage year after year.

Read More
LMK Pipe Renewal