Know the safety rules and procedures that apply to the work that is being done. Determine the
potential hazards (e.g., physical, chemical, biological) and appropriate safety precautions before
beginning any new procedure.
Read More
To stop traffic
Stand in a safe position on the shoulder. Face traffic and extend the paddle in a vertical position
so the full STOP face can be seen by approaching drivers. Night flagging may include the use of
a red lantern or light. To stop traffic the light should be waved back and forth across the path of
an approaching vehicle
Read More
To you, the flagger:
You have been chosen as a traffic flagger because your supervisor feels you are physically able,
mentally alert, and sufficiently commanding in appearance to be obeyed by the motoring public.
You are an indispensable part of all maintenance and construction operations. We want you to
study the following instructions so that they become second nature. Your life, the lives of your
fellow workers, and the lives of highway users depend upon your alertness and on your ability to
control traffic with your stop-slow sign paddle.
Read More
LMK Pipe Renewal facilities on state highway right of ways are to be maintained in a manner
satisfactory to the State of Florida and at LMK Pipe Renewal expense.
Read More
Frequent and abrupt changes in geometries that require rapid maneuvers (such as lane narrowing,
dropped lanes, or main roadway transitions) should be avoided. Provisions should be made for
the safe operation of work vehicles, particularly on high-speed, high-volume roadways.
Read More
Any member of the crew who serves as a flagger should be equipped with a Stop-Slow paddle and a reflective vest. Crewmembers shall be trained for proper flagging procedures.
Read More
All requirements pertaining to the safety, employees in the above listed publications are included in this Safety Manual by reference. In this Safety Manual, it is not practical to prescribe detailed requirements for all situations that may arise; therefore, it is the responsibility of individual employees to determine applicability of the aforementioned publications to their own activities.
Read More
Fire Hazards
If a fire breaks out in a LMK facility and it cannot be immediately and completely extinguished, you should follow the Emergency Reporting Procedures listed below.
Read More
Vison loss and severe eye injuries occur all too often in today’s workplaces. According to the Centers for Disease Control and Prevention (CDC), each day, about 2,000 U.S workers sustain a job-related eye injury that requires medical treatment. Due to the severity and frequency of these injuries, there is no room for shortcuts or excuses when it comes to protecting your eyes on the job.
Read More
1. Always wear your seatbelt when in a vehicle or heavy equipment. Seatbelts are critical to preventing serious injuries and death while driving or operating. Motor vehicle crashes are still the number one cause of fatalities on the job in the United States……..
Read More
When we see someone struggling with a task the first thing we naturally want to do is jump in and help.
Most times, this is perfectly fine and there is no issue that comes of jumping in to help. There are times however, when it is better to let someone else intervene or to not intervene at all…
Read More
Diesel engines are used frequently on construction sites, mines, and other types of work sites. Diesel engines power everything from water pumps to heavy equipment that allows for day-to-day activities to be completed efficiently
Read More
Burn injuries are common both at home and in the workplace. The American Burn Association states that there are over 40,000 hospitalizations each year due to burns. There are a few different types of burn injuries.
Read More
The following is a list of the safety equipment that should be worn and/or used by all employees working in sewer manholes at all times, unless stated otherwise.
Read More
The following are the proper procedures and general safety precautions that will be followed
before entering a manhole for the purpose of taking flow measurements, performing inspections
or making sewer repairs:
Read More
The construction of sewers should be in accordance with standard design, with special attention
to self-cleaning velocities, good alignment, proper spacing of manholes, and adequate provision
for ventilation. These design standards when followed, will provide for a safer work
environment. However, there are several other points of safety that are of major importance.
Read More
inspected on a regular basis, and are sanitized before and after use. The SCBA training video
will be viewed twice a year by all personnel.
Read More
The concentration of the hazard will be monitored before respirator selection and periodically
thereafter to ensure that the correct respirators are being utilized.
Read More